
■ Head lamp - Type A

■ Head lamp - Type B

■ Fog lamp - Type A

■ D.R.L. Lamp - Type A

■ D.R.L. Lamp - Type B
(1) Headlamp (Low/High) (Bulb type)
(2) Side marker (Bulb type)
(3) Front turn signal lamp/ Position lamp
(4) Front turn signal lamp (Bulb type)
(5) Headlamp (Low/High) (Bulb/LED type)
(6) Side marker (LED type)
(7) Position lamp (LED type) or Position lamp/Day time running lamp (LED type)
(8) Fog lamp (Bulb type)
(9) Day time running lamp (Bulb type)
Bulb replacement precaution Please keep extra bulbs on hand with appropriate wattage ratings in case of emergencies. Refer to “Bulb Wattage” in chapter 9.
■ Rear combination lamp (5 Door) - Type A ■ Rear combination lamp (5 Door) - Type B ■ License plate lamp (5 Door) ■ High mounted stop lamp (5 Door) (1) Rear turn signal lamp (Bulb type) (2) Back up lamp (Bulb type) (3) Stop and tail lamp (Bulb type) (4) Tail lamp (Bulb type) (5) Side marker (Bulb type) (6) Stop and tail lamp (LED type) (7) Side marker (LED type) (8) License plate lamp (9) High mounted stop lamp
Components and components location Component Driver Power Window Switch Schematic diagrams Circuit Diagram [Non-Folding Mirror Type] [Folding Mirror Type] Repair procedures Removal 1.
Repair procedures Inspection 1. Check the condenser fins for clogging and damage. If clogged, clean them with water, and blow them with compressed air. If bent, gently bend them using a screwdriver or pliers. 2.