Kia Rio: Instrument cluster / LCD window Control

The LCD window modes can be changed by using the control buttons on the steering
wheel.
[Type A]
(1) TRIP : TRIP button for changing trip modes
(2) RESET : RESET button for resetting items
[Type B]
(1) : MODE button for changing LCD modes
(2) / : MOVE scroll switch to select items
(3) OK : SET/RESET button for setting or resetting items
❈ For the LCD modes, refer to “LCD window” in this chapter.
Adjusting Instrument Cluster Illumination
The instrument panel illumination intensity can be adjusted by pressing the control
switch with the headlight switch in any position when the ignition sw ...
Speedometer
The speedometer indicates the forward speed of the vehicle.
The speedometer is calibrated in miles per hour and/or kilometers per hour.
Tachometer
The tachometer indicates the appr ...
Other information:
Repair procedures
Replacement
1.
Remove the condenser.
2.
Remove the cap (B) on the bottom of the condenser with L wrench (A).
Tightening torque :
2.7~3.2 N.m (0.28~0.33 kgf.m, 2.0~2.4 lb-ft)
...
Repair procedures
Inspection
Rear Wiper Motor
1.
Remove the connector from the rear wiper motor.
2.
Connect positive (+) battery cables to terminal 4 and negative (-) battery
cables to terminal 3 respectively.
3.
Check ...