
On a vehicle equipped with a smart key, the trunk can be opened with no-touch activation using the Smart Trunk system.
The trunk can be opened with notouch activation if the conditions below are satisfied:
✽ NOTICE
1. Setting
To activate the Smart Trunk,
(1) Change the LCD modes to User setting mode
(2) Select the Door mode
(3) Check the Smart Trunk.
❈For more details, refer to “LCD Windows” in this chapter

2. Detect and Alert
If you are positioned in the detecting area (50 ~ 100 cm (20 ~ 40 inches) behind the vehicle) carrying a smart key, the hazard warning lights will blink and chime will sound for about 3 seconds to alert you the smart key has been detected and the trunk will open.
✽ NOTICE
Do not approach the detecting area if you do not want the trunk to open. If you have unintentionally entered the detecting area and the hazard warning lights and chime starts to operate, leave the detecting area with the smart key. The trunk will stay closed.

3. Automatic opening
The hazard warning lights will blink and chime will sound 2 times and then the trunk will open.
WARNING
Make sure objects in the rear cargo area do not come out when opening the trunk as this could cause serious injury.
✽ NOTICE
The key should be kept out of reach of children. Children may inadvertently open the Smart Trunk while playing around the rear area of the vehicle.

1. Door lock
2. Door unlock
3. Trunk open
4. Alarm
If you press any button of the smart key during the Detect and Alert stage, the Smart Trunk function will be deactivated.
Make sure to be aware of how to deactivate the Smart Trunk function for emergency situations.
✽ NOTICE

✽ NOTICE
■ Type A ■ Type B Your vehicle is equipped with an emergency trunk release lever located inside the trunk. If someone is inadvertently locked in the trunk, moving the handle in the direction of the arrow will release the trunk latch mechanism and open the trunk.
Opening the liftgate The liftgate is locked or unlocked when all doors are locked or unlocked with the transmitter (or smart key) or central door lock switch.
Repair procedures Replacement 1. Remove the condenser. 2. Remove the cap (B) on the bottom of the condenser with L wrench (A). Tightening torque : 2.7~3.2 N.m (0.28~0.
Description and operation Description The Auto Defogging Sensor is installed on front windshild glass. The Auto Defogging Sensor senses moisture on the windshild. The air conditioner control module receives the signal from the sensor and eliminate the fog by controlling the intake actuator, A/C, auto defogging actuator, blower m