Kia Rio: Body Side Molding / Rear Wheel Guard

Kia Rio 2017-2023 YB Service Manual / Body (Interior and Exterior) / Body Side Molding / Rear Wheel Guard

Repair procedures

Replacement

Put on gloves to protect your hands.

•	Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

•	Take care not to bend or scratch the trim and panels.

1.	Remove the rear tire.

2.	Remove the rear wheel guard (A), after loosening the mounting clips and nuts.

Install in the reverse order of removal.

Replace any damaged clips.

❮Front Wheel Guard

Repair procedures Replacement Put on gloves to protect your hands. • Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

Front Mud Guard❯

Repair procedures Replacement Put on gloves to protect your hands. • Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

Other information:

Kia Rio 2017-2023 YB Service Manual: Rheostat

Components and components location Components Repair procedures Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3.

Kia Rio 2017-2023 YB Service Manual: Compressor Oil

Repair procedures Oil Specification 1. The HFC-134a system requires synthetic compressor oil (PAG) whereas the R-12 system requires mineral compressor oil. The two oils must never be mixed. 2. Compressor oil (PAG) varies according to compressor model.

Kia Rio: Body Side Molding / Rear Wheel Guard

Repair procedures

Other information:

Kia Rio 2017-2023 YB Service Manual: Rheostat

Kia Rio 2017-2023 YB Service Manual: Compressor Oil

Categories