Kia Rio: If you have a flat tire (with Tire Mobility Kit) / Notes on the safe use of the Tire Mobility Kit

  • Park your car at the side of the road so that you can work with the Tire Mobility Kit away from moving traffic.
  • To be sure your vehicle will not move, even when you're on fairly level ground, always set your parking brake.
  • Only use the Tire Mobility Kit for sealing/inflation passenger car tires. Only punctured areas located within the tread region of the tire can be sealed using the tire mobility kit.
  • Do not use on motorcycles, bicycles or any other type of tires.
  • When the tire and wheel are damaged, do not use Tire Mobility Kit for your safety.
  • Use of the Tire Mobility Kit may not be effective for tire damage larger than approximately 6 mm (0.24 in). Please contact the nearest Kia dealership if the tire cannot be made roadworthy with the Tire Mobility Kit.
  • Do not use the Tire Mobility Kit if a tire is severely damaged by driving run flat or with insufficient air pressure.
  • Do not remove any foreign objects such as nails or screws that have penetrated the tire.
  • Provided the car is outdoors, leave the engine running. Otherwise operating the compressor may eventually drain the car battery.
  • Never leave the Tire Mobility Kit unattended while it is being used.
  • Do not leave the compressor running for more than 10 min. at a time or it may overheat.
  • Do not use the Tire Mobility Kit if the ambient temperature is below - -30°C (22°F).

    With the Tire Mobility Kit you stay mobile even after experiencing a tire puncture. The system of compressor and sealing compound effectively and comfortably seals most punctures in a passenger car tire caused by nails or similar objects and reinflates the tire.

    1. Speed restriction label 2. Sealant bottle and label with speed restriction 3. Filling hose from sealant bottle to wheel 4. Connectors and cable for the power outlet direct connection 5.

    Other information:

    Kia Rio 2017-2023 YB Service Manual: Turn Signal Lamp

    Repair procedures Removal Door Mirror Turn Signal Lamp 1. Disconnect the negative (-) battery terminal. 2. Remove the mirror (A) from the mirror holder.    Be careful not to damag

    Kia Rio 2017-2023 YB Service Manual: Front Fog Lamps

    Repair procedures Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the front bumper assembly. (Refer to Body - "Front Bumper Assembly") 3. Remove the front fog lamp assembly (A) after loosening the mounting screws.

    Categories

     
    Copyright © 2025 www.krioyb.com - 0.0109