| Inspection |
Visually check the fuel lines for cracks, leakage, loose connections, deformation or tank band looseness.
Repair procedures Replacement 1. Turn ignition switch OFF and disconnect the negative (-) battery terminal. 2.
Repair procedures Inspection Manual Transaxle Oil Level Check 1. Stop the engine and then raise the vehicle using the lift.
Repair procedures Inspection 1. Check the condenser fins for clogging and damage. If clogged, clean them with water, and blow them with compressed air. If bent, gently bend them using a screwdriver or pliers. 2.
Components and components location Component Location Components 1. Intake actuator 2. Air filter 3. Air filter cover 4. Resistor 5. Mosfet 6. Intake seal 7. Intake upper cover 8.