FCA system produces warning messages, warning alarms, and emergency braking based on the level of risk of a frontal collision, such as when a vehicle ahead suddenly brakes, or when there is no following distance from the vehicle in front.
Forward Warning (1st warning)

The warning message appears on the LCD display with the warning.
Collision Warning (2nd warning)

Emergency braking (3rd warning)

FCA system will activate when FCA system is selected on the LCD display, and when the following prerequisites are satisfied: - The ESC (Electronic Stability Control) is activated.
In an emergency situation, the braking system enters in ready status for prompt reaction upon the driver depressing the brake pedal. FCA system provides additional braking power for optimum braking performance when the driver depresses the brake pedal.
Repair procedures Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the front bumper assembly. (Refer to Body - "Front Bumper Assembly") 3. Remove the front fog lamp assembly (A) after loosening the mounting screws.
Repair procedures Inspection Multifunction Switch Inspection [BCM Type] 1. Check for continuity between the terminals in each switch position as shown below. [Left Handle Drive] Switch Switch position Switch terminal