Kia Rio: Hood / Hood Insulator Pad
Repair procedures
| Replacement |
| 1. |
Using a clip remover, detach the clips, and remove the hood insulator pad (A).
|
| 2. |
Install in the reverse order of removal.
|
Components and components location Component Location 1. Hood assembly Repair procedures Replacement Be careful not to damage the hood and body.
Components and components location Component Location 1. Hood latch release handle Repair procedures Replacement • Put on gloves to protect your hands.
Other information:
Kia Rio 2017-2023 YB Service Manual: Immobilizer Control Unit
Repair procedures Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the main crash pad assembly. (Refer to Body - "Main Crash Pad Assembly") 3. Disconnect the connector of the immobilizer unit and then remove the immobilizer unit (A) after
Kia Rio 2017-2023 YB Service Manual: Blower Resistor (MANUAL)
Repair procedures Inspection 1. Measure the resistance between the terminals. 2. The measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor) Replacement 1.
Categories
- Manuals Home
- Kia Rio Owners Manual
- Kia Rio Service Manual
- Steering System
- Heating,Ventilation, Air Conditioning
- General Information
- New on site
- Most important about car
