Kia Rio: Body Side Molding / Front Wheel Guard

Kia Rio 2017-2021 YB Service Manual / Body (Interior and Exterior) / Body Side Molding / Front Wheel Guard

Repair procedures

Replacement

Put on gloves to protect your hands.

•	Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

•	Take care not to bend or scratch the trim and panels.

1.	Remove the front tire.

2.	Remove the front wheel guard (A), after loosening the mounting clips and nuts.

Install in the reverse order of removal.

Replace any damaged clips.

Side Spoiler

Repair procedures Replacement Put on gloves to protect your hands. &nbs ...

Rear Wheel Guard

Repair procedures Replacement Put on gloves to protect your hands. &nbs ...

Other information:

Kia Rio 2017-2021 YB Service Manual: Wheel

Repair procedures Hub nut tightening sequence Tighten the hub nuts as follows. Tightening torque: 107.9 - 127.5 N·m (11.0 - 13.0 kgf·m, 79.6 - 94.0 lb·ft) When using an impact g ...

Kia Rio 2017-2021 YB Service Manual: Oil Pressure Switch

Repair procedures Removal and Installation 1. Disconnect the oil pressure switch connector (A) and then remove the oil pressure switch (B). Tightening torque : 9.8 - 11.8 N·m (1.0 - 1.2 kgf·m, 7.2 - 8.7 lb·ft) ...