| Replacement |
| 1. |
Loosen the front door checker (B) mounting bolt.
|
| 2. |
Detach the clips, and then remove the front door side weatherstrip (A).
|
| 3. |
Install in the reverse order of removal.
|
Repair procedures Replacement Put on gloves to protect your hands. • Use a plastic panel removal tool to remove interior trim pieces without marring the surface.
Components and components location Component Location 1. Fuel filler door Repair procedures Replacement Use a plastic panel removal tool to remove interior trim pieces without marring the surface.
Components and components location Components Repair procedures Removal When replacing the LDWS switch, check that the symbol mark in the cluster operates normally by pressing the ON/OFF switch.
Repair procedures Inspection 1. Connect the battery voltage and check the blower motor rotation. 2. If the blower motor does not operate well, substitute with a known-good blower motor and check for proper operation.