| Replacement |
| 1. |
Open the glass fully. |
| 2. |
Remove the mounting pins (B), and then remove the deflector (A).
|
| 3. |
Install in the reverse order of removal. |
Components and components location Components 1. Sunroof glass Repair procedures Replacement Put on gloves to protect your hands.
Components and components location Components 1. Sunroof assembly Repair procedures Replacement • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
Repair procedures Inspection 1. In the body electrical system, failure can be quickly diagnosed by using the vehicle diagnostic system (KDS/GDS). The diagnostic system (KDS/GDS) provides the following information. (1) Self diagnosis : Checking failure and code number (DTC)
Repair procedures Inspection 1. Measure the resistance between the terminals. 2. The measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor) Replacement 1.