Kia Rio: Body Side Molding / Rear Wheel Guard

Kia Rio 2017-2022 YB Service Manual / Body (Interior and Exterior) / Body Side Molding / Rear Wheel Guard

Repair procedures
Replacement
  

Put on gloves to protect your hands.

  

Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

Take care not to bend or scratch the trim and panels.

1.

Remove the rear tire.

2.

Remove the rear wheel guard (A), after loosening the mounting clips and nuts.

3.

Install in the reverse order of removal.

  

Replace any damaged clips.

Front Wheel Guard
Repair procedures Replacement    Put on gloves to protect your hands.  &nbs ...

Front Mud Guard
Repair procedures Replacement    Put on gloves to protect your hands.  &nbs ...

Other information:

Kia Rio 2017-2022 YB Owners Manual: Low Tire Pressure Warning Light


This warning light illuminates: Once you set the ignition switch or Engine Start/Stop Button to the ON position. - It illuminates for approximately 3 seconds and then goes off. When one or more of your tires are significantly underinflated. ❈For more details, refer to “Tire Pressure ...

Kia Rio 2017-2022 YB Owners Manual: Headlamp (Low/High beam) (Bulb type) bulb replacement (Headlamp Type A)


1. Open the hood. 2. Remove the headlamp bulb cover by turning it counterclockwise. 3. Disconnect the headlamp bulb socket-connector. 4. Unsnap the headlamp bulb retaining wire by pressing the end and pushing it upward. 5. Remove the bulb from the head lamp assembly. 6. Install a new headla ...

Copyright © www.krioyb.com 2017-2022