
■ Head lamp - Type A

■ Head lamp - Type B

■ Fog lamp - Type A

■ D.R.L. Lamp - Type A

■ D.R.L. Lamp - Type B
(1) Headlamp (Low/High) (Bulb type)
(2) Side marker (Bulb type)
(3) Front turn signal lamp/ Position lamp
(4) Front turn signal lamp (Bulb type)
(5) Headlamp (Low/High) (Bulb/LED type)
(6) Side marker (LED type)
(7) Position lamp (LED type) or Position lamp/Day time running lamp (LED type)
(8) Fog lamp (Bulb type)
(9) Day time running lamp (Bulb type)
Bulb replacement precaution Please keep extra bulbs on hand with appropriate wattage ratings in case of emergencies. Refer to “Bulb Wattage” in chapter 9.
■ Rear combination lamp (5 Door) - Type A ■ Rear combination lamp (5 Door) - Type B ■ License plate lamp (5 Door) ■ High mounted stop lamp (5 Door) (1) Rear turn signal lamp (Bulb type) (2) Back up lamp (Bulb type) (3) Stop and tail lamp (Bulb type) (4) Tail lamp (Bulb type) (5) Side marker (Bulb type) (6) Stop and tail lamp (LED type) (7) Side marker (LED type) (8) License plate lamp (9) High mounted stop lamp
Repair procedures Inspection Self Diagnosis With Scan Tool It will be able to diagnose defects of SMART KEY system with KDS/GDS quickly. KDS/GDS can operates actuator forcefully, input/output value monitoring and self diagnosis. The following three features will be major problem in SMART KEY system.
Repair procedures Inspection 1. Turn the ignition switch ON. 2. Manually operate the control switch and measure the voltage of blower motor. 3. Select the control switch to raise voltage until high speed.