To reduce the probability of fogging up inside of the windshield, the air intake
or air conditioning are controlled automatically according to certain conditions
such as
or
position. Logic can be disabled and
enabled by doing following :
To defog inside windshield 1. Select desired fan speed. 2. Select desired temperature. 3. Press the defroster button ( ). 4. The outside (fresh) air position will be selected automatically.
1. Turn the ignition switch to the ON position. 2. Turn the mode selection knob to the defrost position ( ). 3. Select any fan speed except “0” position.
Specifications Specification Item Type Bulb Watt (W) Front Headlamp Halogen Low/High H4 LL 55/60 Turn signal lamp PY21W 21 Position lamp W5W
Repair procedures Inspection Multifunction Switch Inspection [BCM Type] 1. Check for continuity between the terminals in each switch position as shown below. [Left Handle Drive] Switch Switch position Switch terminal