| Inspection |
| 1. |
Remove the air cleaner element. |
| 2. |
Check that the air filter is excessively dirty. If the air filter is excessively dirty, replace the air cleaner element. |
| 3. |
If the air cleaner element needs to be cleaned, blow compressed air as shown in the illustration to clean it.
|
| 4. |
Reinstall the air cleaner element. |
| Replacement |
| 1. |
Open the air cleaner element cover (A) by unlocking the clamp.
|
| 2. |
Replace the air cleaner element (A) with a new one.
|
| 3. |
Close the air cleaner cover by hooking the clamps. |
Repair procedures Inspection Battery Voltage and Status Check the battery voltage and status using the battery tester. Battery Terminal 1.
Components and components location Components Repair procedures Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3.
Components and components location Component Location Components 1. Intake actuator 2. Air filter 3. Air filter cover 4. Resistor 5. Mosfet 6. Intake seal 7. Intake upper cover 8.