Kia Rio: Hood / Hood open warning

Kia Rio 2017-2024 YB Owners Manual / Features of your vehicle / Hood / Hood open warning

The warning message will appear on the LCD display when hood is open.

The warning chime will operate when the vehicle is being driven at or above 3 km/h (2 mph) with the hood open.

WARNING - Unsecured engine hood

Always double check to be sure that the hood is firmly latched before driving away. If it is not latched, the hood could fly open while the vehicle is being driven, causing a total loss of visibility, which might result in an accident.

CAUTION

Before closing the hood, ensure that all obstructions are removed from the engine compartment and surrounding body sheet metal. Closing the hood with an obstruction present could result in damage to the engine, sheet metal or the impacted objects.

WARNING

The support rod must be inserted completely into the hole whenever you inspect the engine compartment. This will prevent the hood from falling and possibly injuring you.

Closing the hood
1. Before closing the hood, check the following: All filler caps in the engine compartment must be correctly installed. Gloves, rags or any other combustible material must be removed from the ...

Fuel filler door
Opening the fuel filler door The fuel filler door must be opened from inside the vehicle by pulling up the fuel filler door opener. If the fuel filler door does not open because ice has formed a ...

Other information:

Kia Rio 2017-2024 YB Owners Manual: Vehicle stability management (VSM)


This system is designed to provide further enhancements to vehicle stability and steering responses when a vehicle is driving on a slippery road or a vehicle detected changes in coefficient of friction between the right wheels and left wheels when braking. VSM operation When the VSM is in op ...

Kia Rio 2017-2024 YB Service Manual: Oil Level Gauge & Pipe


Repair procedures Removal and Installation 1. Remove the oil level gauge (A). 2. Remove the intake manifold. (Refer to Intake And Exhaust System - "Intake Manifold") 3. Remove the oil level pipe (A). ...

Copyright © www.krioyb.com 2017-2024