Other information:
1. After driving approximately 7 ~ 10 km or about 10 min (4 ~ 6 miles), stop
at a safe location.
2. Connect the filling hose (3) of the compressor (clip mounted side) directly
and then connect the fill ing hose (3) (opposite side) to the tire valve.
3. Connect between compressor and the vehicl ...
Repair procedures
Remove and Installation
1.
Remove the automatic transaxle .
(Refer to Automatic Transaxle System - "Automatic Transaxle")
2.
Remove the adapter plate (A) and drive plate (B).
Tightening torque : ...