| Removal |
| 1. |
Remove the fuel pump. (Refer to Fuel Delivery System - "Fuel Pump") |
| 2. |
Disconnect the fuel pump motor connector (A) and fuel sender connector (B).
|
| 3. |
Disconnect the fuel feed tube quick-connector (A) after removing the fixing clip (B).
|
| 4. |
Remove the cushion pipe fixing clip (A), and then separate the head assembly (B) from reservoir cup.
|
| 5. |
Press the fixing hook (A) with a driver and then remove fuel sender in the arrow direction.
|
| 6. |
Remove the reservoir-cup (B) after releasing the fixing hooks (A).
|
| 7. |
Disconnect the ground pin (A).
|
| 8. |
Remove the fixing clip (A), and then assist pump assembly (B).
|
| 9. |
Remove the free-filter (A) after releasing the fixing hooks.
|
| 10. |
Separate the electric pump motor (A).
|
| 11. |
Replace new fuel filter.
|
| Installation |
| 1. |
Install in the reverse order of removal. |
Repair procedures Inspection [Fuel pump] 1. Turn ignition switch OFF and disconnect the negative (-)battery cable. 2.
Repair procedures Removal 1. Remove the fuel pump. (Refer to Fuel Delivery System - "Fuel Pump") 2.
Repair procedures Removal • Put on gloves to prevent hand injuries. • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to componen
Repair procedures Inspection 1. Connect the battery voltage and check the blower motor rotation. 2. If the blower motor does not operate well, substitute with a known-good blower motor and check for proper operation.