Kia Rio: Seat / Front seat adjustment
Forward and backward

To move the seat forward or backward:
1. Pull the seat slide adjustment lever up and hold it.
2. Slide the seat to the position you desire.
3. Release the lever and make sure the seat is locked in place.
Adjust the seat before driving, and make sure the seat is locked securely by
trying to move forward and backward without using the lever. If the seat moves,
it is not locked properly.
WARNING - Unexpected seat movement
After adjusting a manual seat, always check that it is locked by shifting
your weight to the front and back. Sudden or unexpected movement of the driver's
seat could cause you to lose control of the vehicle.
Seatback angle

To recline the seatback:
1. Lean forward slightly and lift up the seatback recline lever.
2. Carefully lean back on the seat and adjust the seatback of the seat to the
position you desire.
3. Release the lever and make sure the seatback is locked in place. (The lever
MUST return to its original position for the seatback to lock.)
Seat Cushion height (if equipped, for driver’s seat)

To change the height of the seat cushion, push the lever upwards or downwards.
- To lower the seat, push the lever down several times until the seat reaches
the desired position.
- To raise the seat, push the lever up several times until the seat reaches
the desired position.
Driver’s seat
(1) Forward and backward
(2) Seatback angle
(3) Seat height adjustment*
(4) Headrest
Front passenger’s seat
(5) Forward and backward
(6) Seatback angle
(7) Headrest
Rear s ...
The driver's and front passenger's seats are equipped with a headrest for the
occupant's safety and comfort.
The headrest not only provides comfort for the driver and front passenger, but
also ...
Other information:
Stop and tail lamp (LED type) bulb replacement (for 4 door)
If the stop and tail lamp (LED) (1,2) does not operate, have the vehicle checked
by an authorized Kia dealer.
The LED lamps cannot be replaced as a single component because it is part of
an integrated unit. The LED lamps have to be ...
Type A
Type B
Fog lights are used to provide improved visibility when visibility is poor due
to fog, rain or snow, etc. The fog lights will turn on when the fog light switch
(1) is turned to the on position after the headlights are turned on.
To turn off the fog lights, turn the switch ...