Kia Rio: Front Door / Front Door Power Window Regulator
Repair procedures
Put on gloves to protect your hands.
|
• |
Use a plastic panel removal tool to remove interior trim pieces
without marring the surface.
|
• |
Be careful not to bend or scratch the trim and panels.
|
|
1. |
Remove the front door window glass.
(Refer to Front Door - "Front Door Window Glass")
|
2. |
Disconnect the front door power window regulator connector (A).
|
3. |
Loosen the front door power window regulator mounting nuts.
|
4. |
Remove the front door power window regulator (A).
|
5. |
Install in the reverse order of removal.
•
|
Check that glass operation is normal.
|
•
|
Check the damage glass channel, and replace if necessary.
|
•
|
Adjust glass if necessary.
|
|
|
Components and components location
Component Location
1. Front door window glass
Repair procedures
Replacement
...
Components and components location
Component Location
1. Front door outside handle
Repair procedures
Replacement
...
Other information:
Components and components location
Component Location
1. Rear transverse trim
Repair procedures
Replacement
Put on gloves to protect your hands.
...
Description and operation
Description
•
The front impact sensor (FIS) is installed in the Front End Module (FEM).
They are remote sensors that detect acceleration due to a collision at its
mounting location. The primary purpose of the Front Impact Sensor (FIS) ...