| Description |
| 1. |
The ESC OFF switch is for the user to turn off the ESC system. |
| 2. |
The ESC OFF lamp is on when ESC OFF switch is engaged. |
| Removal |
| 1. |
Turn ignition switch OFF and disconnect the negative (-) battery cable. |
| 2. |
Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") |
| 3. |
Disconnect the ESC switch connector (A).
|
| 4. |
Install in the reverse order of removal. |
Components and components location Components Drum type Disc type Repair procedures Removal 1. Remove the rear wheel & tire.
Description and operation Description Introduction of quick brake warning system (ESS) In case of quick brake by driver, the brake lamp or turn signal is blinked to warn against the vehicle at rear.
Repair procedures Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the license lamp assembly (A) after pressing the locking pin. 3. Disconnect the license lamp connector (A).
Description and operation Description The heater unit includes mode control actuator and temperature control actuator. The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows.