| Removal and Installation |
| 1. |
Remove the engine room under cover (A).
|
| 2. |
Install in the reverse order of removal. |
Repair procedures Removal and Installation 1. Remove the engine cover (A). Tightening torque : 6.
Components and components location Components 1. Engine mounting bracket 2. Engine mounting support bracket 3.
Repair procedures Removal Rear Combination Lamp (Outside) 1. Disconnect the negative (-) battery terminal. 2. Remove the rear combination lamp (A) after loosening the mounting screws. 3.
Description and operation Description The heater unit includes mode control actuator and temperature control actuator. The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows.