Kia Rio: Light bulbs / Tail lamp (Bulb type) bulb replacement (for 4 door)

Kia Rio 2017-2022 YB Owners Manual / Maintenance / Light bulbs / Tail lamp (Bulb type) bulb replacement (for 4 door)

1. Open the trunk lid.

2. Loosen the retaining screw of the trunk lid cover and then remove the cover.

3. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly.

4. Remove the bulb from the socket by pressing it in and rotating it counterclockwise until the tabs on the bulb align with the slots in the socket. Pull the bulb out of the socket.

5. Insert a new bulb by inserting it into the socket and rotating it until it locks into place.

6. Install the socket in the assembly by aligning the tabs on the socket with the slots in the assembly. Push the socket into the assembly and turn the socket clockwise.

7. Install the trunk lid cover.

Back-up lamp bulb, Side marker (rear) (LED type) bulb replacement (Rear combination lamp Type B) (for 4 door)
Side marker (rear) (LED type) bulb replacement (Rear combination lamp Type B) (for 4 door) If the Side marker (LED) (1) does not operate, have the vehicle checked by an authorized Kia dealer. ...

Stop and tail lamp (LED type) bulb replacement (for 4 door), High mounted stop lamp bulb replacement (for 4 door)
Stop and tail lamp (LED type) bulb replacement (for 4 door) If the stop and tail lamp (LED) (1,2) does not operate, have the vehicle checked by an authorized Kia dealer. The LED lamps cannot be ...

Other information:

Kia Rio 2017-2022 YB Owners Manual: Turn signals and lane change signals


■ Type A ■ Type B The ignition switch must be on for the turn signals to function. To turn on the turn signals, move the lever up or down (A). The green arrow indicators on the instrument panel indicate which turn signal is operating. They will self-cancel after a turn is completed. I ...

Kia Rio 2017-2022 YB Service Manual: ESC Control Module


Components and components location Components 1. ESC control module connector 2. ESC control module 3. ESC bracket Repair procedures Removal 1. Turn ignition OFF and disconnect the negative (-) battery cable. ...

Copyright © www.krioyb.com 2017-2022