Kia Rio: Sunroof / Sunshade, Resetting the sunroof

Kia Rio 2017-2021 YB Owners Manual / Features of your vehicle / Sunroof / Sunshade, Resetting the sunroof

Sunshade

When opening the sunroof, the sunshade will also open. Once the sunroof is closed, the sunshade can be manually closed.

Resetting the sunroof

Whenever the vehicle battery is disconnected or discharged, or related fuse is blown, you must reset your sunroof system as follows:

1.The ignition switch must be in the ON position.
2.Close the sunroof completely.
3.Release the control lever.
4.Push the control lever forward until the sunroof tilts and slightly moves up and down. Then, release lever.
5.Push the control lever forward until the sunroof is operated as follows:

TILT OPEN → SLIDE OPEN → SLIDE CLOSE

Then, release the control lever.

✽ NOTICE

Do not release the lever until the operation is completed.

If you release the lever during operation, try again from step 2.

❈ For more detailed information, contact an authorized Kia dealer.

✽ NOTICE

If the sunroof is not reset when the vehicle battery is disconnected or discharged, or related fuse is blown, the sunroof may operate improperly.

Tilting the sunroof
To tilt open the sunroof, push the sunroof control lever upward until the sunroof moves to the desired position. To close the sunroof, push the sunroof lever forward or pull downward until the ...

Steering wheel
Electric power steering (EPS) Power steering uses a motor to assist you in steering the vehicle. If the engine is off or if the power steering system becomes inoperative, the vehicle may still be ...

Other information:

Kia Rio 2017-2021 YB Owners Manual: Limitation of the system


FCA system is designed to monitor the vehicle ahead through radar signals to warn the driver that a collision is imminent, and if necessary, apply emergency braking. In certain situations, the radar sensor may not be able to detect the vehicle ahead. In these cases, FCA system may not operate. ...

Kia Rio 2017-2021 YB Owners Manual: Room lamp bulb replacement


WARNING - Interior lamps Prior to working on the Interior lamps, ensure that the “OFF” button is depressed to avoid burning your fingers or receiving an electric shock. 1. Using a flat-blade screwdriver, gently pry the lens cover from lamp housing. 2. Remove the bulb by pulling it straigh ...

Copyright © www.krioyb.com 2017-2021