| Component Location |

| 1. Sunroof 2. Sunroof switch |
3. Sunroof motor & controller
|
| Circuit Diagram |

Repair procedures Inspection Self Diagnosis With Scan Tool It will be able to diagnose defects of SMART KEY system with KDS/GDS quickly.
Components and components location Components Repair procedures Inspection 1. Disconnect the negative (-) battery terminal.
Repair procedures Removal • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
Repair procedures Inspection 1. Measure the resistance between the terminals. 2. The measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor) Replacement 1.