Kia Rio: Light bulbs / Stop and tail lamp / Side marker (Bulb type) replacement (for 4 door)

1. Open the trunk lid.
2. Remove the service cover by pulling out the service cover.

3. Remove the socket from the assembly by turning the socket counterclockwise
until the tabs on the socket align with the slots on the assembly.
4. Remove the bulb from the socket by pressing it in and rotating it counterclockwise
until the tabs on the bulb align with the slots in the socket. Pull the bulb out
of the socket.
5. Insert a new bulb by inserting it into the socket and rotating it until it
locks into place.
6. Install the socket in the assembly by aligning the tabs on the socket with
the slots in the assembly. Push the socket into the assembly and turn the socket
clockwise.
7. Install the service cover.
1. Open the trunk lid.
2. Remove the service cover by pulling out the service cover.
3. Remove the socket from the assembly by turning the socket counterclockwise
until the tabs on the socket ...
Side marker (rear) (LED type) bulb replacement (Rear combination lamp Type
B) (for 4 door)
If the Side marker (LED) (1) does not operate, have the vehicle checked by an
authorized Kia dealer.
...
Other information:
Repair procedures
Replacement
Put on gloves to protect your hands.
•
Use a plastic panel removal tool to remov ...
Components and components location
Components Location
1. Drive shasft (LH)
2. Drive shaft (RH)
[RH]
1. BJ assembly
2. Clip
3. BJ boot band
4. BJ boot
5. Dynamic damper band
6. Dynamic damper
7. ...