Kia Rio: Light bulbs / Stop and tail lamp (LED type) bulb replacement (for 5 door)

Kia Rio 2017-2020 YB Owners Manual / Maintenance / Light bulbs / Stop and tail lamp (LED type) bulb replacement (for 5 door)

If the stop and tail lamp (LED) (1) does not operate, have the vehicle checked by an authorized Kia dealer.

The LED lamps cannot be replaced as a single component because it is part of an integrated unit. The LED lamps have to be replaced with the unit.

A skilled technician should check or repair the stop and tail lamp (LED), for it may damage related parts of the vehicle.

Rear turn signal lamp bulb replacement (for 5 door)
1. Open the trunk lid. 2. Loosen the light assembly retaining screws with a cross-tip screwdriver. 3. Remove the rear combination lamp assembly from the body of the vehicle. 4. Disconnect the r ...

Back-up lamp bulb replacement (for 5 door)
1. Open the liftgate. 2. Remove the service cover. 3. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assemb ...

Other information:

Kia Rio 2017-2020 YB Owners Manual: Manual Mode


Whether the vehicle is stationary or in motion, Manual Mode is selected by pushing the shift lever from the D (Drive) position into the manual gate. To return to D (Drive) range operation, push the shift lever back into the main gate. Manual Mode manages the driving dynamics by automatically ...

Kia Rio 2017-2020 YB Service Manual: ETC (Electronic Throttle Control) System


Specifications Specification ETC Module Throttle Position Sensor (TPS) [integrated into ETC Module] ▷ Type: Hall IC Non-contact sensor type ▷ Specification Throttle angle(°) Output Voltage (V) [Vref=5V] TPS1 TPS2 ...

Copyright © www.krioyb.com 2017-2020