Kia Rio: Light bulbs / Room lamp bulb replacement

WARNING - Interior lamps
Prior to working on the Interior lamps, ensure that the “OFF” button is depressed
to avoid burning your fingers or receiving an electric shock.
1. Using a flat-blade screwdriver, gently pry the lens cover from lamp housing.
2. Remove the bulb by pulling it straight out.
3. Install a new bulb in the socket.
4. Align the lens cover tabs with the lamp housing notches and snap the lens
into place.
CAUTION
Be careful not to dirty or damage the lens, lens tab, and plastic housings.
WARNING - Interior lamps
Prior to working on the Interior lamps, ensure that the “OFF” button is depressed
to avoid burning your fingers or receiving an electric shock.
1. Using a flat-blade ...
1. Using a flat-blade screwdriver, gently pry the lamp assembly from interior.
2. Remove the bulb by pulling it straight out.
3. Install a new bulb in the socket.
4. Install the lamp assembly to ...
Other information:
Filter replacement
It must be replaced when necessary, and should not be washed.
You can clean the filter when inspecting the air cleaner compartment. Clean the
filter by using compressed air.
1. Loosen the air cleaner cover attaching clips and open the cover.
2. Wipe the inside of the a ...
1. Open the hood.
2. Remove the headlamp bulb cover by turning it counterclockwise.
3. Disconnect the headlamp bulb socket-connector.
4. Unsnap the headlamp bulb retaining wire by pressing the end and pushing it
upward.
5. Remove the bulb from the head lamp assembly.
6. Install a new headla ...