Kia Rio: Specifications & Consumer information / Recommended lubricants and capacities
To help achieve proper engine and powertrain performance and durability, use only lubricants of the proper quality. The correct lubricants also help promote engine efficiency that results in improved fuel economy. These lubricants and fluids are recommended for use in your vehicle.
M/T : Manual transmission
IVT : Intelligent variable transmission
Recommended SAE viscosity number
Engine oil viscosity (thickness) has an effect on fuel economy and cold weather operation (engine start and engine oil flowability). Lower viscosity engine oils can provide better fuel economy and cold weather performance, however, higher viscosity engine oils are required for satisfactory lubrication in hot weather. Using oils of any viscosity other than those recommended could result in engine damage. When choosing an oil, consider the range of temperature your vehicle will be operated in before the next oil change. Proceed to select the recommended oil viscosity from the chart.
Air conditioning system
We recommend that you contact an authorized Kia dealer for more details. ...
Vehicle Identification Number (VIN), Vehicle certification label
Vehicle Identification Number (VIN)
Frame Number
The vehicle identification number (VIN) is the number used in registering your
vehicle and in all legal matters pertaining to its ownership, etc. ...
Other information:
Kia Rio 2017-2025 YB Owners Manual: High mounted stop lamp bulb replacement (for 5 door), License plate lamp bulb replacement
High mounted stop lamp bulb replacement (for 5 door) If the high mounted stop lamp (1) does not operate, have the vehicle checked by an authorized Kia dealer. A skilled technician should check or repair the high mounted stop lamp, for it may damage related parts of the vehicle. License plat ...
Kia Rio 2017-2025 YB Owners Manual: Tail lamp (inside) bulb replacement (for 5 door)
1. Open the liftgate. 2. Remove the service cover. 3. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly. 4. Remove the bulb from bulb-socket by pulling it out. 5. Insert a new bulb by inserting it in ...
