Kia Rio: Blower / Blower Unit

Components and components location

Component Location

Components

1. Intake actuator
2. Air filter
3. Air filter cover
4. Resistor
5. Mosfet
6. Intake seal
7. Intake upper cover

8. Intake door
9. NVH pad
10. Intake lower cover
11. Blower upper cover
12. Blower lower cover
13. Blower fan
14. Blower motor

Replacement

1.	Remove the heater & blow. (Refer to Heater - "Heater Unit")

Separate the blower unit from the heater unit after loosening the screws.

Make sure that there is no air leaking out of the blower and duct joints.

3.	Installation is the reverse order of removal.

❮Blower

Blower Motor❯

Repair procedures Inspection 1. Connect the battery voltage and check the blower motor rotation. 2.

Specifications Specification Item Type Bulb Watt (W) Front Headlamp Halogen Low/High H4 LL 55/60 Turn signal lamp PY21W 21 Position lamp W5W