Kia Rio: Body (Interior and Exterior) / Trunk Lid
Repair procedures
| Adjustment |
| (5Door) |
| 1. |
After loosening the tailgate hinge (A) mounting bolts, adjust the tailgate by moving it up and down, or right and left. |
| 2. |
Adjust the tail gate height by turning the tailgate overslam bumpers (B). |
| 3. |
After loosening the tailgate striker (C) mounting bolts, adjust the tailgate striker by moving it up and down, or right and left.
|
Repair procedures Replacement Do not apply sealant to the body. 1.
Components and components location Component Location (4Door) 1. Trunk lid assembly Repair procedures Replacement (4Door) • Wear gloves to protect hands from injury.
Other information:
Kia Rio 2017-2023 YB Service Manual: Immobilizer Control Unit
Repair procedures Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the main crash pad assembly. (Refer to Body - "Main Crash Pad Assembly") 3. Disconnect the connector of the immobilizer unit and then remove the immobilizer unit (A) after
Kia Rio 2017-2023 YB Service Manual: Rear Washer Switch
Repair procedures Inspection Multifunction Switch Inspection [BCM Type] 1. Check for continuity between the terminals in each switch position as shown below. [Left Handle Drive] Switch Switch position Switch terminal
Categories
- Manuals Home
- Kia Rio Owners Manual
- Kia Rio Service Manual
- Steering System
- Suspension System
- General Information
- New on site
- Most important about car
