Kia Rio: Airbag Module / Passenger Airbag (PAB) Module
Description and operation
The passenger airbag (PAB) is installed inside the crash pad and protects the
front passenger in the event of a frontal crash. The SRSCM determines if and when
to deploy the PAB.
Never attempt to measure the circuit resistance of the airbag module
(squib) even if you are using the specified tester. If the circuit resistance
is measured with a tester, accidental airbag deployment will result in serious
personal injury.
|
Components and components location

1. Passenger Airbag (PAB)
|
|
Description and operation
Description
Driver Airbag (DAB) is installed in the steering wheel and electrically connected
to SRSCM via the clock spring.
It protects the driver by deplo ...
Description and operation
Description
The Side Airbags (SAB) are installed inside the front seat and protects the driver
and passenger from danger when side crash occurs. The SRSCM det ...
Other information:
Infant or small child
You should be aware of the specific requirements in your country. Child and/or
infant seats must be properly placed and installed in the rear seat. For more information
about the use of these restraints, refer to “Child restraint system” in this section.
Larger childr ...
Repair procedures
Inspection
1.
Check for continuity between terminals. If the continuity is not as specified,
replace the hazard lamp switch.
No.
Description
No.
Description
...