Kia Rio: Light bulbs / Headlamp (Low/High beam) (Bulb type) bulb replacement (Headlamp Type B)
![](images/headlamp_low_high_beam_bulb_type_bulb_replacement_headlamp_type_b_-309/1/kiario38_004.png)
1. Open the hood.
2. Remove the headlamp bulb cover by turning it counterclockwise.
3. Disconnect the headlamp bulb socket-connector.
4. Remove the bulb-socket from the headlamp assembly by turning the bulb-socket
counterclockwise until the tabs on the bulb-socket align with the slots on the headlamp
assembly.
5. Install a new bulb-socket assembly in the headlamp assembly by aligning the
tabs on the bulb-socket with the slots in the headlamp assembly. Push the bulb-socket
into the headlamp assembly and turn the bulb-socket clockwise.
6. Install the headlamp bulb cover by turning it clockwise.
Headlamp bulb
![](images/headlamp_low_high_beam_bulb_type_bulb_replacement_headlamp_type_b_-309/1/kiario39_002.png)
WARNING - Halogen bulbs
Handle halogen bulbs with care.
- Halogen bulbs contain pressurized gas that will produce flying pieces
of glass if broken.
- Always handle them carefully, and avoid scratches and abrasions. If the
bulbs are lit, avoid contact with liquids. Never touch the glass with bare hands.
Residual oil may cause the bulb to overheat and burst when lit. A bulb should
be operated only when installed in a headlamp.
- If a bulb becomes damaged or cracked, replace it immediately and carefully
dispose of it.
- Wear eye protection when changing a bulb. Allow the bulb to cool down
before handling it.
1. Open the hood.
2. Remove the bulb-socket from the headlamp assembly by turning the bulb-socket
counterclockwise until the tabs on the bulb-socket align with the slots on the headlamp
assembl ...
Headlamp (Low/High beam) (LED type) bulb replacement (Headlamp Type B)
If the headlamp (Low/High beam) (1) does not operate, have the vehicle checked
by an authorized Kia dealer.
Front turn sign ...
Other information:
Repair procedures
Inspection
1.
Connect the battery voltage and check the blower motor rotation.
2.
If the blower motor does not operate well, substitute with a known-good
blower motor and check for proper operation.
3. ...
Components and components location
Components
1. Shift lever knob & boots
2. Shift lever assembly
3. Shift cable assembly
Repair procedures
Removal
1.
Place the shift lever in the "N" position.
...