Kia Rio: Front Seat / Front Seat Shield Outer Cover
Components and components location
1. Front seat shield outer cover
|
|
Repair procedures
|
Put on gloves to protect your hands.
|
| • |
Use a plastic panel removal tool to remove interior trim pieces
without marring the surface.
|
| • |
Take care not to bend or scratch the trim and panels.
|
|
| 1. |
Remove the front seat assembly.
(Refer to Front Seat - "Front Seat Assembly")
|
| 2. |
Remove the recliner handle (A) after loosening the screw.
| •
|
Correctly remove the front seat shield outer cover to
the removal procedure and direction.
|
| •
|
Be careful not to damage the mounting bracket and hook
when removing the cover.
|
|
|
| 3. |
Remove the pumping lever cap (A).
|
| 4. |
Remove the pumping lever (A).
|
| 5. |
Remove the front seat shield outer cover (A) after loosening the mounting
screws.
|
| 6. |
Install in the reverse order of removal.
| •
|
Make sure the fuel filler door locks/unlocks and opens/closes
properly.
|
| •
|
Replace any damaged clips.
|
|
|
Components and components location
Component Location
1. Front seat assembly
Repair procedures
Replacement
1.
Loosen the f ...
Components and components location
Component Location
1. Front seat shield inner cover
Repair procedures
Replacement
...
Other information:
(1) SRS control module/ Rollover sensor
(2) Front impact sensor
(3) Side impact sensor
(4) Pressure side impact sensor
WARNING - Air bag sensors
Do not hit or allow any objects to impact the locations where air bag
or sensors are installed. This may cause unexpected air bag deployment, ...
Components and components location
Components
Connector Pin Information
No.
Connector A
Connector B
1
Rear door left speaker (+)
-
2
Rear door left speaker (-)
...
Front Seat Assembly
Front Seat Shield Inner Cover