Repair procedures Disassembly • Use fender covers to avoid damaging painted surfaces.
Components and components location Components 1. Cylinder head cover 2. Cylider head cover gasket Repair procedures Removal • Use fender covers to avoid damaging painted surfaces.
Repair procedures Inspection Rear Wiper Motor 1. Remove the connector from the rear wiper motor. 2. Connect positive (+) battery cables to terminal 4 and negative (-) battery cables to terminal 3 respectively.
Repair procedures Inspection 1. Measure the resistance between the terminals. 2. The measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor) Replacement 1.