Kia Rio: Light bulbs / Side marker (front) (LED type) bulb replacement (Headlamp Type B), Front fog lamp bulb replacement

Kia Rio 2017-2024 YB Owners Manual / Maintenance / Light bulbs / Side marker (front) (LED type) bulb replacement (Headlamp Type B), Front fog lamp bulb replacement

Side marker (front) (LED type) bulb replacement (Headlamp Type B)

If the Side marker (LED) (1) does not operate, have the vehicle checked by an authorized Kia dealer.

The LED lamps cannot be replaced as a single component because it is part of an integrated unit. The LED lamps have to be replaced with the unit.

A skilled technician should check or repair the Side marker (LED), for it may damage related parts of the vehicle.

Front fog lamp bulb replacement

If the front fog lamp (1) does not operate, have the vehicle checked by an authorized Kia dealer.

A skilled technician should check or repair the front fog lamp, for it may damage related parts of the vehicle.

Headlamp (Low/High beam) (LED type) bulb replacement (Headlamp Type B), Front turn signal lamp bulb replacement (Headlamp Type B)
Headlamp (Low/High beam) (LED type) bulb replacement (Headlamp Type B) If the headlamp (Low/High beam) (1) does not operate, have the vehicle checked by an authorized Kia dealer. Front turn sign ...

Position lamp + DRL (LED type) bulb replacement, Position lamp + DRL (LED type) bulb replacement
Position lamp + DRL (LED type) bulb replacement If the position lamp + DRL (LED) (1) does not operate, have the vehicle checked by an authorized Kia dealer. The LED lamps cannot be replaced as a ...

Other information:

Kia Rio 2017-2024 YB Owners Manual: Stop and tail lamp bulb replacement (for 5 door)


1. Open the trunk lid. 2. Loosen the light assembly retaining screws with a cross-tip screwdriver. 3. Remove the rear combination lamp assembly from the body of the vehicle. 4. Disconnect the rear combination lamp connector. 5. Remove the socket from the assembly by turning the socket coun ...

Kia Rio 2017-2024 YB Owners Manual: Fan speed control, To turn off the blowers, Air conditioning


Fan speed control The ignition switch must be in the ON position for fan operation. The fan speed control knob allows you to control the fan speed of the air flowing from the ventilation system. To change the fan speed, turn the knob to the right for higher speed or left for lower speed. To ...

Copyright © www.krioyb.com 2017-2024