Kia Rio: Power windows / Power window lock button
The driver can disable the power window switches on the rear passengers' doors
by pressing the power window lock switch to the lock position (pressed).
When the power window lock switch is pressed:
- The driver's master control can operate all the power windows.
- The front passenger's control can operate the front passenger's power window.
- The rear passenger's control cannot operate the rear passenger's power window.
CAUTION - Opening/closing Window
To prevent possible damage to the power window system, do not open or close
two windows or more at the same time. This will also ensure the longevity of the
fuse.
WARNING - Power windows
- Do not allow children to play with the power windows. Keep the power
window lock button (on the driver's door) in the LOCK (pressed) position.
- Do not extend a face or arms outside through the window opening while
driving.
Always double check to make sure all arms, hands, head and other obstructions
are safely out of the way before closing a window.
Pressing or pulling up the power window switch momentarily to the second detent
position (6) completely lowers or lifts the window even when the switch is released.
To stop the window at the des ...
To raise or lower the window, turn the window regulator handle clockwise or counterclockwise.
WARNING
When opening or closing the windows, make sure your passenger's arms, hands
and body are saf ...
Other information:
Components and components location
Component Location
1. Back view camera
2. AVN head unit
3. Steering angle sensor
Description and operation
Description
1.
To display back of the vehicle to assist the driver, it receiv ...
Warning messages appear on the LCD to warn the driver. It is located in the center
of the instrument cluster.
The warning message may appear differently depending on the type of instrument
cluster and some may not show the warning message at all.
The warning message is shown in either symbol, ...