Kia Rio: Lane Departure Warning System (LDWS) / Lane Departure Warning System (LDWS) Unit

Kia Rio 2017-2024 YB Service Manual / Body Electrical System / Lane Departure Warning System (LDWS) / Lane Departure Warning System (LDWS) Unit

Components and components location

Components

Repair procedures

Removal

When replacing the LDWS switch, check that the symbol mark in the cluster operates normally by pressing the ON/OFF switch.

1.	Disconnect the negative (-) battery terminal.

2.	Using a screwdriver or remover, remove the mirror wiring cover (A).

3.	Disconnect the LDWS unit connector (A).

4.	Remove the LDWS unit (B) by pulling out lock pins (A).

Installation

1.	Install the LDWS unit.

2.	Connect the LDWS unit connector.

3.	Install the mirror wiring cover.

4.	Connect the negative (-) battery terminal.

Lane Departure Warning System (LDWS)

Components and components location Components 1. LDWS ON/OFF switch 2. Instrument cluster 3. LDWS unit (MFC) ※ MFC : Multi Function Camera ...

Lighting System

Specifications Specification Item Type Bulb Watt (W) Front Headlamp Halogen Low/High ...

Other information:

Kia Rio 2017-2024 YB Service Manual: Output Speed Sensor

Specifications Specification Item Specification Type Hall effect sensor Current 22 mA (Max) Output voltage High : 4.8 V - 5.2 V Low : Below 0.8 ...

Kia Rio 2017-2024 YB Owners Manual: Stop and tail lamp bulb replacement (for 5 door)

1. Open the trunk lid. 2. Loosen the light assembly retaining screws with a cross-tip screwdriver. 3. Remove the rear combination lamp assembly from the body of the vehicle. 4. Disconnect the rear combination lamp connector. 5. Remove the socket from the assembly by turning the socket coun ...